CE Certified
Power Capacity: 1400W ~ 8400W
Working voltage is low to 2V, and up to 350Vrms
Current range: 10Arms ~ 60Arms, peak current: 45A ~ 270A
Frequency range: 44 ~ 1000Hz, DC
Peak factor: 1.4 ~ 5.0000
Adjustable power factor, setting range 0-1.0
3 units in parallel to realize a 3-phase load
Work mode: Constant current CC, constant resistance CR, constant power CP
Current shift: The current shift can be adjusted under testing
DC: Static loading, dynamic loading, 40 programming steps
AC: Waveform simulation, sine, 3-15 harmonic, phase gate, crest factor
Upper/lower limits adjustment, over limit alarming(GO/NG)
Remote voltage detection sense port, used for precise measurement, eliminate wires voltage drop in wires
Protection function: Overvoltage, overcurrent, overpower, overheat, and DC reversed polarity. Measurement parameter: U, I, P, F, and PF
Order information and extended functions
AN29201(F): AC/DC Electronic Load 260V/10A/1400W
AN29202(F): AC/DC Electronic Load 260V/20A/2800W
AN29203(F): AC/DC Electronic Load 260V/30A/4200W
AN29204(F): AC/DC Electronic Load 260V/40A/5600W
AN29205(F): AC/DC Electronic Load 260V/50A/7000W
AN29206(F): AC/DC Electronic Load 260V/60A/8400W
RS485, GPIB optional
Production Function
l Waveform simulation
Test Function
l Power factor test
Simulate inductive and capacitive load, PF is from 0 to 1. If load current phase shift and PF both need to be set, PF can be set on the front panel easily, do not need wire connection.
l Regulation test
Under CC mode, load current is just changing setting value, not with DUT output voltage. Please refer to the characteristic curve
l Dynamic performance test
Dynamic mode is switching between 2 levels in cycle, please refer to the characteristic curve. Dynamic current rising/dropping slope can be adjusted separately
l Programmable steps
4 groups, 10 steps/group. 4 groups can be parallel into 40 steps, and also can be divided into separated steps
l Connect in parallel and series
3 units in parallel to realize 3 phase load
